Best Choice

4.9/5

4.9 out of 5

  • Weight: 13.5 lbs
  • Size:11.8 x 11 x 13.2

best home serger

4.9/5

4.9 out of 5

  • Weight: 13.5 lbs
  • Size: 14 x 11 x 11.5

best for beginners

4.8/5

4.8 out of 5

  • Weight: 16.7 lbs
  • Size: 13 x 15 x 13.4

best for professional's

4.7/5

4.7 out of 5

  • Weight: 15.5 lbs
  • Size: 12.5 x 13.5 x 7.7

Best with coverstitch

4.6/5

4.6 out of 5

  • Weight: 18.6 lbs
  • Size: 13.5 x 11 x 11.5

what is the best serger? Read My Master Buyer's Guide Below

best serger machine

Let’s take a look at some of the best products currently on the market with my serger sewing machine review:

My Verdict

best serger overall

With a reliable track record, the Brother Thread Serger with Differential Feed may be the component you need for creating a high-quality finished product with a professional look. Whether you’re trying to work on spaghetti straps, knit fabric, linen, or even formal wear, this serger is up to the challenge. In fact, some may consider this to be the best serger.  

There are 22 different built-in stitch functions—from narrow and rolled hem to specialty stitch functions for delicate formal wear like wedding gowns or attire. Not only is it color-coded to help sewers keep better track of their stitches, but there’s even-numbered lower and upper looper threading too. However, if buyers do get confused, the product comes with both a paper manual and video instructions. 

As far as warranties and protections go, this machine comes with a twenty-five-year warranty and free lifetime phone support. Even if the warranty ends, any questions you may have about the machine are only a phone call away from being answered. 

Along with the serger itself, purchasing this machine also comes with helpful accessories such as two snap-on feet, needles, and a softcover to help protect the serger while you aren’t using it.

  • Pros
  • Comes with a twenty-five-year limited warranty and free lifetime support
  • The knob on the side allows for sewers to adjust between 5 and 7 mm
  • Unlike some sergers, customers can slide off the removable arm if they want to sew cylindrical items like sleeves
  • Has a differential feed ratio of 0.7 to 2
  • Up to 1,300 stitches per minute
  • Multiple stitch options
  • Includes both a paper manual and video instructions to help answer any questions that customers may have about operating the machine
  • Cons
  • The machine may require a little bit of oiling before it’s used
  • Although it comes with a warranty, customers may need to take their machines to an authorized service center if they want specific issues fixed
My Verdict

best serger overall

My Verdict

best home serger

With 4-3-2 thread capabilities, the Singer Serger can provide the professional touch and finish that your sewing projects need. To make keeping track of your stitches a little bit easier, buyers will find that this machine is color-coded. 

When you want to adjust the length of your stitch, all you need to do is turn the knob. For projects that require multiple stitch lengths, this tool can come in handy. Speaking of adjustments, modifying the tension when you’re working with different materials is also as easy as turning a few knobs. 

Depending on which stitch you want to do, this serger is capable of creating a rolled hem, a three thread overlock stitch typically used for embellishments, a flatlock stitch, or even a three thread mock safety stitch. 

When it comes to add-ons, the Singer Serger does not skimp on accessories. Customers who purchase this product will also get a removable free arm for working on hard-to-reach places, an LED light, an extra-high presser foot lifter, and a 25-year limited warranty. There’s even a carry handle attached to the top of the machine so that customers can easily transport this serger from spot to spot without too much trouble.

  • Pros
  • Includes a 25-year limited warranty so that if buyers run into any issues, all they need to do is call
  • Also comes with a set of tweezers, needles, removable arm, dust cover, and screwdriver
  • Capable of sewing 1,300 stitches per minute
  • Color-coded threading system
  • To prevent trimming the fabric while you’re sewing, the machine allows you to move the upper knife
  • Comes with DVD instructions to help customers operate the machine easier
  • Cons
  • The paper instructions may be confusing
  • Taking the removable arm off may not be as easy as it’s advertised
My Verdict

best home serger

My Verdict

best serger for beginner

As an advanced serger, this Brother Serger includes a color-coded threading guide to help make more precise stitches on a variety of different fabrics and might be the best coverstitch machine. Whenever they want to, sewers can create decorative stitching, chain stitching, or cover-stitching. 

To save time, there’s even a looper threading system and an impressive speed of up to 1,100 stitches per minute. For large projects that may require thousands of stitches, the Brother Serger can reduce weeks or months of work into only a few days, making this the best serger with coverstitch.

If you need to, you can also adjust the stitch length using the dial on the side. Even within the same project, you can easily switch between stitch lengths anytime you need to. In addition to the serger itself, customers will also find that this machine comes with a few more helpful accessories.

Along with a blind foot and gather foot, buying this machine also means getting an accessory bag with a needle set, four-thread nets, four spool caps, a hexagonal wrench, tweezers, a cleaning brush, and an operational manual. If you run into any issues with the machine, all you need to do is flip through the instruction manual for more information.

  • Pros
  • Comes with an accessory bag and softcover to make transporting the serger from place to place easier
  • Adjusting the tension on the machine is easier than some other choices
  • With only three needles, learning to thread with this machine isn’t as challenging
  • Includes a hexagonal wrench for easy repairs
  • Will easily thread a wide variety of different fabrics
  • Cons
  • Comes with a paper manual, but doesn’t include any video or DVD instructions on how to use the machine
My Verdict

best serger for beginner

My Verdict

best professional serger

With a maximum speed of around 1,500 stitches per minute, one of the JUKI Portable Thread Serger’s biggest advantages is its speed. While many machines only have 1,000-1,300 stitches per minute, this machine may be the right option for professional sewers that need to create a larger quantity of items in a shorter amount of time. 

The differential feed ranges from 0.7 to 2 and allows for sewers to easily switch or adjust the settings whenever they want to change the material they’re sewing. Unlike some machines, which may still run while the swing cover is open and create the potential for permanent damage, this serger includes a safety mechanism that prevents it from running when the swing cover is still open. Speaking of safety, sewers can also move the upper knife out of the way for easier and safer threading access. 

Besides portability, another major advantage of the JUKI Portable Thread Serger is portability. While some machines may claim to be portable, many of them might not contain carry handles (or might be too bulky to safely and easily transport). However, this is not the case with the JUKI serger. Not only does the product only weigh around twenty pounds, but there’s a convenient handle for transportation.

  • Pros
  • Only weighs around twenty pounds and is extremely portable
  • Has a maximum stitch length of 4 mm, making it suitable for lightweight or heavy fabrics
  • Includes safety mechanisms to prevent permanent damage to the machine or other safety concerns
  • Color-coded
  • With a maximum speed of 1,500 stitches per minute, this machine is much faster than many other choices
  • Cons
  • While it does come with a paper manual, there are no video or DVD instructions included
  • Understanding the paper instructions can be challenging for new sewers
  • No bin for scraps included
My Verdict

best professional serger

My Verdict

best serger with coverstitch

Whether you’re a sewing professional or someone just looking to obtain a professional finish, the Singer Professional 5 Serger may be exactly what you’re looking for. With the ability to sew up to 1,300 stitches per minute, this serger works swiftly and won’t make you feel as if you’re lagging behind. 

As the name suggests, there are 2-3-4-5 thread capabilities, making this machine capable of handling a wide variety of different fabric and material types. One of the advantages of this product is the amount of control that it gives the sewer. 

Unlike some options, which may only give sewers a limited ability to adjust the length or modify the settings for a specific project, the Singer Professional 5 Serger allows for buyers to adjust the cutting width, tension, and the length of the stitch. 

Despite being a professional product, the setup for this machine is meant to be quick and easy for sewers of all skill levels and experiences. Along with a paper manual, there’s also a CD workbook that sewers can refer to during the setup process and while they’re trying to learn their way around the machine. 

When it comes to hemming, this machine offers four built-in rolled hems for lightweight or heavy-duty material. Changing the hem mode or switching materials is also designed to be effortless and take seconds.

  • Pros
  • Allows for decorative stitching and embellishments with the double chain stitch
  • Includes four built-in rolled hems
  • Has the ability to handle a narrow cover-stitch, wide cover stitch, or triple cover stitch
  • Includes a bin for storing fabrics and keeping scraps off your workspace
  • Has a fully automatic self-adjusting tension system to help sewers get balanced stitches
  • CD workbook helps buyers learn to set up and use the machine’s unique functions
  • Cons
  • The paper manual may be more challenging for some sewers (especially those with less experience to understand)
  • There may be some difficulty with threading

My Verdict

best serger with coverstitch

Final Thoughts

Although each of these sergers come with their own benefits and advantages, my choice for the best serger machine is the Brother 1034D. While it may not be the fastest serger available, it can provide the high-quality professional touch that many sewers seek. 

Not only do the various settings allow for everything from heavy-duty stitching to tiny double chain stitches on embellishments, but the included workbook is designed to make using the machine easy for sewers of all skill and experience levels. While every sewer may be looking for something a little different, the versatility of the Brother 1034D may be exactly what you need.

Whether you’re a professional seamstress or an amateur sewer trying to get the hang of a new skill, figuring out the best serger to buy can be a challenge. With so many options out there, it can be challenging to figure out which choice is best for you. Luckily, we’ve included everything you should know about sergers as well as my favorite options below:

Serger

How to Choose the Best Serger

While sergers can make sewing even more convenient than before, when it comes to buying a serger, there are a few different factors to consider. Since everyone has different needs and wants from their serger, there is no one-size-fits-all solution. 

What works for you may not be the right option for another sewer. The last thing you want is to end up with a low-quality product that doesn’t add value to your sewing projects. Here’s what you should think about when trying to find the best serger sewing machine:

How Often You Plan to Use It

One of the most significant considerations, when you’re thinking about a serger, is how often you plan to use it. If you’re only planning to use it occasionally or every few months, you may only need to purchase a basic, inexpensive serger. A basic serger without any of the bells-and-whistles might not be appropriate if you plan to use it all the time, but for occasional use, it can save you more money in the long run.

However, if you plan to use your serger with any frequency, it might be in your best interest to look for a high-quality model that you know will last the test of time.

Buying From a Reliable Brand

Although there are plenty of items where buying an off-brand product doesn’t make any difference, sergers might not be one of them. With most sergers—especially those that you’ve been using for years—it’s only natural that you’ll need to replace a part or two. Obtaining a replacement part from a small off-brand may be more difficult (or even impossible). 

Along the same lines, trying to get a serger from an off-brand fixed or serviced may be more challenging as well. 

Reliable brands often include additional products, such as specialty feet, for sewers to purchase with sergers too. While the specific brand you choose can vary based on your individual needs, it’s almost always in your best interest to buy from a more dependable company.

Durability

In most cases, sewers purchase a serger with the intent that it’ll last them for several years. Even when something breaks or needs to be replaced, you usually only need to take it to a service center. While even the most durable sergers will most likely need repairs at some point, there’s no reason your serger should need to be fixed constantly.

Rather than deal with constant repairs or replace your serger every few years, it’s a good idea to look for a model that’s built with sturdy parts. In many cases, a serger that includes metal mechanisms will last much longer than one that has plastic components on the inside. 

Another thing that can increase durability is a sturdy case. Many sergers will include a soft cover to protect the machine and prevent it from getting exposed to harmful elements.

Threading Ease

Even if it might not be a top consideration when choosing the best serger, threading ease can be crucial. A machine that takes too long to thread or rethread can quickly slow down projects and hinder you from getting your work done promptly. 

Speaking of threads, one helpful feature can be a color-coded thread path. Without color-coding, it’s easy to get confused while you’re trying to sew. Although most modern-day sergers include color-coded thread paths, double-checking before you buy can save you a lot of time and hassle.

Included Accessories

Some sergers may come without all the bells-and-whistles, but others may come with plenty of accessories to make your sewing process even better. When you’re shopping around, it’s always a smart idea to look at the included accessories. Many sergers come with specialty feet as well as tools for cleaning or regular maintenance. 

The more accessories that are included with your best serger, the better. Having to buy specialty feet separately can quickly become expensive.

Woman Work On Serger

Serger vs. Sewing Machine: What’s the Difference?

While you may be familiar with all the ins-and-outs of a sewing machine, you might not understand the difference between serger and sewing machine. Although some websites may sometimes use these terms interchangeably, there are a few significant differences when it comes down to serger vs. sewing machine.

While sergers are a type of sewing machine, their primary purpose is to produce finished seams—much like you would find on clothing at a department store. A serger uses different threads (usually between two and twelve) to go over the raw edge of your material with an overcast stitch. While sewing machines often use a single bobbin and needle, a serger will use multiple needles and around 3-5 bobbins. As a result, the work you get from a serger may not only look more “finished,” but with maximum speeds around 1,500 stitches per minute, sergers also work quickly and more efficiently too. 

Keep in mind that, while sergers can accomplish some of what sewing machines can’t, a serger is not capable of sewing in reverse, making a buttonhole, or top-stitching (with a few exceptions).

Advantages of a Serger

While not sewers may need a serger—especially if they’re only working on small or infrequent projects—sergers can offer several benefits to sewers of all skill and experience levels.

Speed

Many home sewing machines may only be able to handle 650 to 1,000 stitches per minute. In comparison, a serger can usually spit out 1,300 to 1,500 stitches per minute. Speed may not be the most significant advantage of a serger, but for professional sewers that deal with numerous projects and deadlines, the speed of a serger can be critical.

Embroidery and Embellishments

One primary reason that many sewers may choose to purchase a serger has to do with embroidery and embellishments. With more extensive capabilities, sergers are often capable of adding embellishments to decorative threads, reducing common issues with puckering or rippling, and finishing decorative edgings.

Two Sergers Stand On Table

Precautions For Using a Serger

Like with any machine, it’s always a good idea to understand the safety concerns or precautions before you begin using your serger. Here are a few practices to keep in mind:

  • Make sure your workspace is organized and tidy. Not only can a messy, unorganized workspace make it more challenging to use the serger efficiently, but losing track of sharp objects like sewing needles can be a safety risk. 
  • Don’t place any objects in any openings on the serger. 
  • For portable sergers that you can easily transport, make sure you’re always working on a sturdy, hard surface. Soft surfaces like a bed or couch can block air openings. Not to mention, delicate surfaces always run the risk of the machine tipping over. 
  • Don’t use blunt or bent needles. Depending on the serger you buy, it’s always a good idea to use needles that the manufacturer recommends. 
  • When changing the needle or making adjustments to threading, don’t forget to switch the machine off first.

Although you may already have a good idea of sewing safety etiquette, following these rules can help prevent the risk of permanent damage to you or the machine.

How To Properly Maintain a Serger

Most sergers are meant to last for years, but how well you take care of them can play a significant role in their lifespan. 

Even if there’s nothing wrong with your serger, it’s a good idea to get it checked by a technician and professionally cleaned every one or two years. Not only will a professional cleaning extend the lifespan of the serger, but having a technician look over the serger can help stop most small issues before they become bigger problems. 

While it’s good to have your machine professionally cleaned on a regular basis, you can also save a few bucks and clean the machine yourself. Here’s what you can do:

  1. Before you start, gather your materials: a lint brush, soft cloth, pipe cleaners, tweezers, oil, a small screwdriver, and the owner’s manual. Some of these items may come included with the serger. If that’s the case, make sure you use the specific things that came with the machine. 

  2. Next, unthread the machine and remove the needles and presser foot. Not all models will allow you to remove the throat plate, but some may. Open both of the doors so that you have access to the loopers. 

  3. Using a lint brush (or paintbrush or make-up brush), gently clean the lower end of the serger. A lint brush can help remove lint from the loopers or the feed dog area. Some of the lint may be a little tricky to remove, in which case, a brush with stiff bristles may be a better tool to use. If you need to, you can pull long threads from the serger using tweezers. 

  4. For hard-to-reach areas, try using the pipe cleaners. The narrow end and flexibility of this tool can reach areas that you might not be able to get with your hands or a lint brush.

  5. As an optional step, you can try to use a small vacuum to remove lint as well. However, keep in mind that too much compressed air can move lint into the machine rather than out of it. 

  6. Once you’ve cleaned the looper area and you’re sure that all the lint has been removed, you can then use oil in areas where metal components move against other metal components. Many serger manufacturers may produce their own oil to use with these machines or recommend a specific type for cleaning. 

  7. To avoid issues with the tension dials, try flossing them with a little bit of embroidery floss. Tiny bits of thread can easily clog the tension dials (even if it isn’t visible). It’s especially crucial to clean this area since a clogged tension dial can affect stitch formation and the accuracy of your tension setting.

  8. When you clean your serger, don’t forget to look if the knife needs replacing. You can tell if the blade needs replacing since your fabric will begin to look “chewed” rather than cleaned and finished. While replacing the knife shouldn’t be too tricky, a trained technician should always be involved since you need to place the blade in the correct position.

  9. Once you’ve finished cleaning the inside of the serger, you can begin putting it back together. If you removed the stitch plate and the presser foot, it’s time to put these things back. After every cleaning session, you’ll want to replace the needle with a new one and wipe off the outside of the serger with a soft cloth.

While you don’t need to clean your serger all the time, the frequency can depend on how often you use the machine and what fabrics you use. Some fabrics may generate a lot more fuzz and lint, making it essential to clean the serger after every couple of uses.

If you don’t use your serger on a regular basis, you may not need to clean it all the time. For even more information about how to correctly clean your serger, check out this video here.

FAQ icon

Most Popular Questions About Sergers

I decided to start a new heading here at the end of each post. I will public and answers for the most popular questions which I get to my email every day about machines that was mention in this post.

You can ask your questions on my contact me page or leave your comment below the article.

Question (Q):

I have never used a serger before. Is it easy to thread? What can you advise?

Answer (A):

Threading a serger is not as simple as threading a regular sewing machine. You should be a little experienced to achieve this process. But don’t be afraid you just need a few time practice to do it well. Just find some YouTube videos with instructions or use instructions which include in the package. Just follow followed the directions and you will learn this quickly.

Q:

Can serger be used just like a regular sewing machine if necessary?

A:

Yes, absolutely it can be used as a regular sewing machine. All sergers propose enough number of stitches and can do standard sewing machines tasks.

Q:

Can Singer 14T968DC sew heavy materials like denim or upholstery fabriс?

A:

Probably yes, if you will use special needles. This serger will sew a few layers of denim, but sewing 4-5 layers of upholstery fabric will be hard.

Q:

Is it difficult to adjust the tension on Brother 1034D?

A:

No, this is not a difficult task at all. Brother’s machines include diagrams of the threads for each tension and you will handle it easily. Just follow the directions in the manual and you will not meet any troubles.

This is interesting icon

Serger Tip #1

The very first tip is for someone who just took their Serger out of the box. Don’t do anything. Don’t do a thing, just freeze. Here’s tip number one. Okay. Now, when you get your brand new Serger, it’s probably going to have four different color threads already threaded in the machine. Well, what I want you to do is place it on your sewing table and then freeze. Grab your cell phone, open up the front door to your machine and take a picture of how it’s threaded. That way, you’ll have a visual reference of which color goes where. Then I want you to print off that picture and I want you to slide it under your machine, and that way you will always have a reference for how the machine is threaded.

And also, take a marker or a labeler, if you have one, and number your thread in the proper order. Now, my machine has four slots, one, two, three, four, but the number of order is four, three, one, two. I just took a Sharpie and I wrote on there one, two, three and four in the right order. Again, if you have a Brother 1034D, it’s four, three, one, two. There you go. That’s two tips in one.

Serger Tip #2

Tip number two. Okay. Now I want you to keep those different color threads in your machine and I want you to put a piece of fabric in and just start sewing.

As you’re sewing along, I want you to slowly adjust the right tension dial and see what that does to that color piece of thread, then put it back to about to about 45. Then I want you to adjust the second dial, or number one, in the correct order, and then I want you to go to three, and go to four and keep adjusting those dials and keep adjusting the settings on the side of your Serger, and that way you can see what each one of them does to your thread and to your fabric. Then you can Mark down on that picture that we took, “Okay, I used a piece of linen. These are the settings I need for a good seam. Okay, I used a piece of stretch fabric. These are the settings I need.” That way you’ve written in all of your dialed-in information, you’ve got your correct number order written on your machine and you are going to be ready to tear up the world of sewing with your Serger.

Serger Tip #3

Tip number three. Okay, well, you have run out of all that different color starter thread because you’ve been smart and you ran a piece of fabric through and played with your dials to see what the correct settings for your machine are. Now it’s time to thread your machine. Now, as you can see, I have cone thread. This might be a little frightening to you for two reasons. One, you’re used to regular sized spools of thread, and two, you think, “Dang, that’s going to be expensive, all that thread.” But let me tell you, these to use a lot of thread. The one in your needle, maybe not so much, but you’re going to want this cone of thread for two reasons. One, cheap thread is a bad idea. Repeat that out loud. Cheap thread and a Serger is a bad idea.

Almost all of the problems I ran into when I was Serging, and the failures, is because I was using cheap thread, and I was using spools of thread, and spools bounce around the machine. Yes, there’s a little capper that you can put on top of the spool of thread after you run it through your Serger, but it is not worth your trouble. Don’t use cheap thread and don’t use spools. Go ahead and buy cones. You can get them really cheap or at least inexpensively. Everybody recommended to me getting Maxi-Lock Thread, and you know what, everyone was right. It is really smart to get the right threat, the best thread for your machine. Now, if you’re sewing a certain type of fabric, definitely look into what the right thread is for that project, but Maxi-Lock will not do you wrong.

Stephanie Green

Stephanie Green

I fell in love with sewing eight years ago after stumbling on Etsy and being fascinated by seeing all the creative projects hobbyists were able to make in their spare time. I think part of my interest is that sewing seemed like such an old-fashioned activity, and yet so many young people enjoyed it.

Join me at

You may also like

16 thoughts on “5 Best Serger – STUNNING Real Comparison 2020 (Bonus Buying Guide)”

  1. Looks like the Brother 1034D is a winner…good list with lots of info! Do any of these ever go on sale? Like, should I wait for a summer sale if I want to get one? I hate it when I buy something and then turn around and the price has been reduced…

  2. Yes, the Brother 1034D is a winner on my list, but please be sure that the other four sergers included here are also a great choice. Just read carefully all reviews about each machine and you will choose correctly what you need. I don’t know exactly about sale you should spy sometimes the prices maybe stores will make a big sale, so you shouldn’t skip it.

  3. YES to a color coded thread path!! You really know your stuff. Thank you for all your research and for splitting up the categories based on interest. I don’t know of any site that is doing thorough reviews about sewing machines, so, really, thank you.

  4. Thank you! I just doing what I love, sewing machines are my passion, I spent maybe thousands even more hours sewing my stuff, so I can share all my experience with my readers. Enjoy your reading!

  5. Your maintenance tips were super helpful and creative, thanks. Would wiping it down with a damp rag be ok? I mean I assume it is, I just get a little paranoid with certain types of equipment. It’s amazing that everything isn’t water resistant these days…

  6. Sergers seem like a must for big projects that require speed. They really make a difference in terms of appearance as well, very professional and sleek looking seams. Thanks for putting in the legwork on the research for differentiating between the best serger options. 

  7. I get a little nervous about the idea of cleaning a serger by myself, so I really think the professional cleaning is the way to go…but you’re right, there needs to be some maintenance done along the way to keep these bad boys running.

  8. Wonderfully detailed advice and instructions, thank you. Sounds like Brother 2340CV is ideal for beginners, a good combination of efficient, powerful, and user-friendly. Thanks for taking the time to offer your advice.

  9. I hadn’t thought of using a small vacuum on a serger!  Great tip. The Singer 14T968DC is seriously impressive looking, and I like how much flexibility it offers in adjusting cutting width, tension, etc. 

  10. Total beginner here. I am looking forward to the day when I will use a serger, and I know exactly where I’ll be coming for advice! Seems like at this point I’ll need something a little simpler (and cheaper), but I love knowing all the options that are out there for my future self!!

  11. You can wipe your sewing machine with a rag, just a little wet it and good squeeze it after that. Don’t overdo it because this is an electronic device, so just care about it as you care about your TV or another device.

  12. Brother 234CV is a great serger, I am sure you will enjoy using it in your projects. If you will have any questions about maintenance or just will need any advice please contact me I will try to help. Anyway you can always contact Brother technical support they love to help newbies)

  13. Singer 14T968DC is a perfect advanced serger not for newbies. It has a lot of professional features, that not very easy to learn from scratch. If you have some experience with such machines you will enjoy using it! You should try

  14. I am writing to my readers and share all my experiences with you. I love to get such feedback, this helps me to understand that I doing it right. Thank you!

Leave a Comment

Your email address will not be published. Required fields are marked *